接下來的內容主要介紹沼氣發電機夏季的保養內容，大家了解一下。

The following content mainly introduces the maintenance content of biogas generator in summer.

1、要注意不能影響沼氣發電機組的正常通風冷卻。要經常清潔通風孔道內的灰塵污物，保持通暢無阻。

1. Pay attention not to affect the normal ventilation and cooling of biogas generator unit. Always clean the dust and dirt in the ventilation duct and keep it unblocked.

2、要在沼氣發電機組工作的地方做好現場防雷工作，各機械設備和在建工程須按規定做好避雷接地，發電機組裝置做好保護接零。

2. The site lightning protection work shall be carried out at the place where the biogas generator unit works. All mechanical equipment and projects under construction shall be grounded according to the regulations, and the generator unit shall be grounded properly.

3、安裝了發電機組的應與外電線路電源連鎖，可設置切換裝置或雙電源總配電箱，嚴禁并列運行。下班后應切斷各機械設備的電源，預防發生觸電事故。

3. If the generator set is installed, it shall be interlocked with the external power supply. A switching device or a dual power distribution box can be set. Parallel operation is strictly prohibited. Cut off the power supply of all mechanical equipment after work to prevent electric shock accidents.

4、發電機拆裝方法與異步電動機大致相同，但由于發電機重量大，拆裝時應注意不要碰傷。拆卸端蓋時，注意不要碰傷凸出在機座處面的定子線圈；取出轉子時，要在電機定、轉子間墊以紙板，以防損壞鐵芯和繞組，在用鋼索綁扎轉字時，鋼索不得碰到轉子軸頸、鳳扇、集電滑及轉手引線。

4. The disassembly and assembly method of the generator is roughly the same as that of the asynchronous motor, but due to the heavy weight of the generator, attention should be paid to avoid bumping during disassembly and assembly. When removing the end cover, pay attention not to damage the stator coil protruding from the base; When taking out the rotor, cardboard shall be placed between the stator and rotor of the motor to prevent damage to the iron core and winding. When binding the rotor with steel rope, the steel rope shall not touch the rotor journal, fan, collector slide and rotating lead.

夏日為雷雨多發季節，要在發電機組當?shù)刈龊矛F(xiàn)場防雷作業，各類機械設備和在建工程須按規則做好避雷接地，發電機組設備做好維護接零。更多相關內容就來我們網站http://www.pp198.cn咨詢！

Summer is a thunderstorm-prone season, so on-site lightning protection work should be done in the local area of the generator set. All kinds of mechanical equipment and projects under construction must be grounded according to the rules, and the generator set equipment should be well maintained and grounded. Come to our website for more relevant content http://www.pp198.cn consulting service