焦化發電機組如果在平日使用傍邊呈現一些故障，需要對焦化發電機組進行拆開的時候，應該如何進行準確的拆開方式呢？現在就來看看吧。

If there are some faults in the coking generator set during daily use, how should the coking generator set be disassembled accurately? Now let's have a look.

1、拆開外表、管路及附件：拆掉油溫表和水溫表的感應塞；拆下機油壓力表和管路；拆下外表盤、轉速表的軟管、撤除所有的機油管、柴油管和水管；拆下空氣濾芯、消聲器、進氣管、排氣管；撤除所有的機油管、柴油管和水管；拆下空氣濾清器、吸引器、進氣管和排氣管路；撤除冷卻體系的所有部件。撤除機油濾清器、機油冷卻器等。從深圳發電機上面拆開發動體系以及充電體系。

1. Disassemble the appearance, pipeline and accessories: remove the sensing plugs of the oil temperature gauge and water temperature gauge; Remove the oil pressure gauge and pipeline; Remove the outer disc and the hose of the tachometer, and remove all the oil pipes, diesel pipes and water pipes; Remove the air filter element, muffler, intake pipe and exhaust pipe; Remove all oil pipes, diesel pipes and water pipes; Remove the air filter, aspirator, intake pipe and exhaust pipe; Remove all components of the cooling system. Remove the oil filter, oil cooler, etc. Disassemble the engine system and charging system from the Shenzhen generator.

2、驗查發電機組內部的油和水：擰開缸體、水箱、機油冷卻器的放水開關排放潔凈；放出機油盤和機油冷卻器內的悉數機油；關閉油箱閥門，拆下悉數的油管并放出油箱內的柴油；在放出水、機油、和柴油時，要保持維修場所的清洗。

2. Check the oil and water inside the generator set: unscrew the drain switches of the cylinder block, water tank and oil cooler to discharge clean; Drain all the oil from the oil pan and oil cooler; Close the oil tank valve, remove all the oil pipes and drain the diesel in the oil tank; When draining water, engine oil and diesel oil, keep the maintenance site clean.

3、拆開汽缸蓋：先要拆掉氣門室罩殼；在拆開搖臂時，要先把機油管與汽缸蓋的回油螺絲拆下；拆開搖臂座時，兩個搖臂座一同取下并放好；在拆開汽缸蓋螺母時要先外后內按對角進行，其他部件按順序取下。然后撤除焦化發電機組的剩下部件。

3. Dismantle the cylinder cover: remove the valve cover first; When disassembling the rocker arm, first remove the oil return screw of the oil pipe and the cylinder head; When disassembling the rocker arm base, take down and place the two rocker arm bases together; When disassembling the cylinder head nuts, the outer part shall be removed first and then the inner part shall be removed diagonally. Other parts shall be removed in sequence. Then remove the remaining parts of the coking generator set.

焦化發電機組整機拆除與部分部件的分解相關事項就講解到這里了，您對此有什么不了解的內容或者有需求，就來我們網站http://www.pp198.cn聯系吧！

This is the end of the whole removal of the coking generator unit and the disassembly of some parts. If you have any questions or needs, please come to our website http://www.pp198.cn Get in touch!